Marlene Blazer | Жакет Марлен sewing pattern

For this blazer, use moderately heavyweight, soft, non-stretch or low-stretch woven fabrics made from natural, artificial, blended, or synthetic fibers. The following fabrics are recommended for the main fabric: - Linen, nettle fabric, denim, cotton, dupioni silk (raw silk) For the fusible interfacing, a knit or woven fusible interfacing with a weight of 45–60 g/m² is recommended. Important! Highly stretchy fabrics (such as knit jersey) and thin, sheer fabrics (such as chiffon, organza, or stretch lace) are not recommended. The blazer shown in the sample photos is made from noil silk (silk bourrette). The fabric is moderately heavyweight, soft, and non-stretch. Fiber content: 100% silk. Fabric weight: 160 g/m². A woven fusible interfacing weighing 48 g/m² was used for the sample garment.

1. Main fabric, 140 cm (55") wide, for one-way layout: 1.45–2.25 m (1.6–2.5 yd) 1.2 Fabric for making a muslin (test garment) with properties similar to the main fabric (for example, calico/muslin). Refer to the main fabric consumption table for the required amount.

2. Knit or woven fusible interfacing, 140 cm (55") wide: 0.8–0.9 m (⅞–1 yd) 3. Straight-grain fusible stay tape (selvedge tape), 1 cm (⅜") wide: 0.8–0.95 m (⅞–1 yd) 4. Bias-cut fusible stay tape with reinforced stitching, 1.5 cm (⅝") wide: 1.1–1.3 m (1¼–1½ yd) 5. Bias binding, 1.5 cm (⅝") wide: 13.2–15.3 m (14½–16¾ yd) 6. Matching thread: 1 spool for the sewing machine.